Harken Small Boat Major Track Bend Fiddle Blocks 5 in 89 mm Tube

5 in 89 mm Tube ID 3

Sheave runs exclusively on a ball bearing system for fast trim and release under any load

All UGPS and GP ends for outboard pole end use only

TABS SUP-->Manufacturer part #: CL217 MK2

Harken Small Boat Major Track Bend Fiddle Blocks 5 in 89 mm TubeManufacturer part #: 275 Track is often bent to follow the cabin house curve or boom radius. Sometimes track is bent vertically, ends up, to relieve tension on the sail's leech as the traveler car moves off the boat's centerline. To perform smoothly and carry the correct load, the traveler car's length must suit the track radius. If the load requires a long car, but the radius will be too tight, consider using two short cars joined by a coupler.