Silicone Hose, 1/2" I.D. 180 degree Elbow, 4" Legs Color:Red Use our Lined Hose Clamps

Use our Lined Hose Clamps (Part No

The 4-ply reinforcement results in a 5mm wall thickness (86mm / 3 3/8" and 73mm / 2 7/8" OD) and a working pressure rating over 15 psi (78 psi burst pressure)

These one foot (12" / 33cm) long straight hoses have a 1 1/8" (28mm) ID with a smooth

Four layers of polyester reinforcement and 3 reinforcing rings allow operating pressures of 42 psi (170 psi burst pressure) and temperatures up to 350° F (180° C)

Silicone Hose, 1/2" I.D. 180 degree Elbow, 4" Legs Color:Red Use our Lined Hose ClampsOur silicone hose is built for endurance and performance in custom coolant and intake plumbing applications. Each hose is hand crafted from multiple layers of silicone rubber with polyester reinforcing fabric between the layers. The silicone rubber remains flexible and tough from 50 C to +180 C ( 76 F to 356 F). These 180 degree elbows have a 1 2" ID and a smooth, shiny "wipe down" finish. Legs measure approximately 4 inches long (measured from the