Fox 2.5" Shock #75 Rebound Shim Stack Set For 7/8" Shaft Shocks Or 1-5/8" Shaft Air Shocks Dash Lights The notch cut out of

The notch cut out of the top prevents the u-nut from spinning

This tab was designed for our clip-on u-nuts for easier panel installation and removal

Load At Full Compression: 3318lbs / 14759N

Spring Rate: 125 lbs/inch - 2

Fox 2.5" Shock #75 Rebound Shim Stack Set For 7/8" Shaft Shocks Or 1-5/8" Shaft Air Shocks Dash Lights The notch cut out of803 10 075 a On the bottom cap, where the shaft enters the shock, Fox will usually stamp what valving they put inside the shock. For example 50 70 which is #50 compression and #70 rebound. Any time you revalve your shock, it's a good idea to replace the stover nut. You can download any of the Fox shim stack charts below for reference. The lower the number is, the faster the shock reacts. The higher the number is, the slower the shock reacts. For