Flexitec 225g/sqm CSM Fiberglass £40 carriage This avoids cold spots and

This avoids cold spots and minimises the risk of condensation

a feathered edge should go over a straight edge

Once the EPDM is laid

and more flexible than other roofing options

Flexitec 225g/sqm CSM Fiberglass £40 carriage This avoids cold spots andFlexitec 225g sqm CSM Fiberglass It is important that fibreglass CSM reinforcement is stored in dry conditions. Before use, inspect the mat to ensure there are no damaged, defective or wet areas present. Carefully measure the roof and assess how many strips of mat are needed, while allowing a 50mm overlap on each width of the mat. Carefully remove the mat from its polythene bag and lay on a clean dry surface. Roll out the required length if possible