Extension Cable, Stepper Motor esun pla This pressure varies with both

This pressure varies with both the weather and altitude

It can be mounted on the SBR16 Linear rails

50mA maximum sinking output current

Chip: NXP -NTG213 +125KHz TK4100

Extension Cable, Stepper Motor esun pla This pressure varies with bothExtension Cable, Stepper Motor to Dupont 4 (No Latch) Approximately 1 meter long Nema 17 stepper motor 6 pin connector to Dupont 4 pin connector. The default wiring for this extension cable is listed below. You may need to switch the pins around to match your setup. This is done by carefully lifting the plastic tap that holds the pin in place and gently sliding the pin out. Controller Side Motor Side PIN 1 PIN 1 PIN 2 PIN 4 PIN 3 PIN 6 PIN 4 PIN 3