180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) Manual 3-Roll (Large Radius) Bender depending on the type

depending on the type

This roll set will bend the following sizes of material: 1/2" x 1/2" Square

SE provides those extra tools that you will need when you are concerned about setup and production times

Rotation & Angle" design interface

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (42.0 mm OD, 177.8 mm CLR) Manual 3-Roll (Large Radius) Bender depending on the typeSpecs Outside Diameter of the Tubing (OD): 42. 0 mm Minimum Wall Thickness (DOM): 0. 095" (2. 4 mm) Minimum Wall Thickness (4130): 0. 095" (2. 4 mm) Minimum Wall Thickness (ERW): 0. 083" (2. 1 mm) Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 7" (177. 8 mm) Maximum Degree of Bend: 180, after springback Maximum Ovality: <10%,