Body- Armguard 31" G17 This helps prevent the smaller

This helps prevent the smaller drivers from sliding to the right side of the car during cornering

This is the Left Front spindle used for all NC front axles

There is some flexibility in the height dimension due to the length of the material

The lower RR shock hole is the standard location with an extended hiem on the shock shaft

Body- Armguard 31" G17 This helps prevent the smallerThis aluminum panel is only available in white. Some fitting is required. Use a stepped unibit to drill dzus buttonholes and tin snips to remove any excess material. Use clamps to hold panel in place on chassis. Then with a pencil or pen mark the dzus holes on the inside of the panel.