LJT2.1/4M RHP Single Row Angular Contact Ball Bearing 2.1/4 Inch Bore Shields provide greater chemical and corrosion

provide greater chemical and corrosion resistance

Support the counter-support on the housing and screw it onto the wedge spindle of the internal extractor Hold the handle of the counter-support and pull the bearing out safely by tightening the nut Retighten the tensioning nut when pulling out

Basic Bearing Insert: UCX09- 27

Challenge designation: UCP206-18

LJT2.1/4M RHP Single Row Angular Contact Ball Bearing 2.1/4 Inch Bore Shields provide greater chemical and corrosionRHP Single row angular contact ball bearings can accommodate axial loads in one direction only. A single row bearing is typically adjusted against a second bearing. The bearings are non separable and the bearing rings have one high and one low shoulder. The low shoulder enables a large number of balls to be incorporated in the bearing, giving it a relatively high load carrying capacity. Boundry dimensions (inch) d: 2. 1 4 D: 4. 1 2 B: 7 8 Basic load