ARP 3800 Head Studs Camshafts & Valvetrain We highly recommend running a

We highly recommend running a 136# Comp Cams valve spring

The TRU-BOOST boost controller gauge includes an on-board 29 PSIg pressure sensor

the AEM hose is not rated for fuel submersion

On a dyno run with no other changes except for the spark plug wires we found an extra 4 horsepower to the wheels compared to MSD wires

ARP 3800 Head Studs Camshafts & Valvetrain We highly recommend running aIncludes: 8 shorter studs 8 longer studs 16 washers 16 nuts 1 packet of moly lube Greatly improved clamping reduces the risk of head gasket failure. Recommended 45, 70, 85 ft lbs using moly lube. Studs last for the lifetime of your engine making them a great investment over the single use torque to yield bolts from the factory. Teflon tape required for threads going into the block to prevent coolant leaks. Do not use a paste to seal these.